Window installation cost per window
The average cost to install a single window is between $400 and $900, including materials and labor. This range is typical for a standard-size, double-hung window with a vinyl frame and double-pane glass, which is the most common type of window.
However, you could pay anywhere from $200 to $7,000 to replace a single window, depending on a few important factors.
“[Pricing] will vary greatly based on the size of window, the quality of the window line selected, the features each window selected has,” said Josh Alford, owner of Josh A Roofing, a roofing company in Beavercreek, OH, that handles window replacements and other home improvement services.
Here are a few key factors to consider when estimating your cost for window installation:
- Window type: The type of window you want is one of the most influential cost factors. Small transom windows or basement hopper windows can cost as little as $200 to $250, while larger and more complex bay windows and bow windows can cost up to $7,000.
- Window size: Larger windows will almost always cost more in materials. Oversized or heavy windows may also drive labor costs higher if the installer needs multiple techs on site to maneuver the windows into place.
“A ballpark estimate would be $25 to $45 per square foot of window, and custom windows will cost more than standard-sized windows,” said Manny Kavouklis, President of CMK Construction, Inc., a full-service home remodeling company based in Tampa, FL.
- Frame material: Vinyl is the most common window frame material, according to Alford, but you can also choose aluminum, wood, fiberglass and composite. Some companies also make steel-framed windows. Pricing is highest for fiberglass and wood and lowest for vinyl and aluminum. Composite frames usually fall somewhere in the middle.
- Glass options: Double-pane glass is standard in modern windows for energy efficiency, but you can downgrade to single-pane to save money or upgrade to triple-pane for maximum efficiency, comfort and noise dampening. According to Kavouklis, upgrading to triple-pane will add between $100 and $200 per window.
- Glass add-ons: You could pay more per window if you want low-emissivity (low-E) glass or window tinting, which can help reduce sunlight and heat gain in your home. Expect to add $50 to $150 per window for low-E glass and $75 to $150 per window for tinting, said Kavouklis.
- Location in your home: Windows on the first floor that are easy to access and don’t require safety equipment or lifts will usually come with lower labor costs than windows on the second floor. You should expect to add between $50 and $150 per window for any on the second floor, said Kavouklis.
- Local labor fees: Installation costs can vary based on the local cost of living. You may pay more if you live in a high-cost area where the labor costs increase with the cost of living.
- Removal and disposal: Many window installers will remove your old window and dispose of it for you, but some will charge an additional fee for this service. Pricing may be higher for oversized or particularly heavy windows, such as bay windows.
According to our experts, removal and disposal fees are usually included but can add $50 to $100 per window if the company charges separately for the service.
- Trim and finish work: Most window installation companies include finish work in your total, like reinstalling interior and exterior trim around the window. However, some may upcharge for the service, which can push total costs higher, so make sure you consider this when choosing a window installer.
- Permits: Replacing windows usually doesn’t require permits, but you might need to pay permit fees if you’re installing a window where one previously didn’t exist or if you’re moving or expanding an existing window. These jobs require structural work, which means you’ll need permits.
Permit fees for window installation average between $100 and $400, according to our experts.
Typical cost ranges for window replacement components
The following table provides typical cost ranges and additional expenses for various window replacement components.
| Cost component | Typical range/added cost |
|---|---|
| Frame: Aluminum | $400 to $900 average unit cost |
| Frame: Composite | $600 to $1,200 average unit cost |
| Frame: Fiberglass | $700 to $1,500 average unit cost |
| Frame: Vinyl | $300 to $800 average unit cost |
| Frame: Wood | $800 to $1,500 average unit cost |
| Glass upgrades | Add $50 to $200 per window |
| Labor | $360 to $1,200 per window |
| Permits | $100 to $400 if necessary |
| Removal and disposal | $50 to $100 per window |
| Second-story window | $50 to $150 per window |
| Window unit (material) | $240 to $800+ |
» FIND: The best window companies
Window installation labor cost breakdown
On average, 40% to 60% of your total window installation cost will go toward labor, according to our experts. Much like with materials, many factors can affect labor fees:
- Geographic location: Base labor fees usually track the local cost of living, so you should expect to pay more per window if you live in a major metropolitan area or in a state with a high cost of living.
- Window location: Installation sites that are easily accessible will usually have lower labor costs. Any window installation that requires additional safety gear, ladders, scaffolding or window lifts will cost more than windows that your installers can access without specialized equipment.
- Scope of work: The number of windows you want installed will always affect the total, but it can also have an impact on the per-window cost.
In most cases, window installers will offer a 5% to 10% discount on per-window pricing if you guarantee them more work, said Kavouklis. As such, whole-home window installation will usually come with lower costs per window than a one-off installation.
- Contractor choice: The specific installer you choose for your window installation project can affect pricing, too. Dedicated window installers usually offer the lowest cost per window, while general contractors more often charge an additional fee that can drive the cost per window up.
Regardless of the type of pro you choose, you may also see different prices based on the contractor’s overhead and the upcharge they use to determine profit.
Window installation cost by window type
The type of window you want installed plays a major role in determining your total cost for several reasons, including:
Window style and size
Window style is closely related to window size, with options like transom windows and hoppers being small and coming with generally lower costs, and options like bay windows being large and fetching much higher prices. Larger windows also require more work to create the opening, and they’re more likely to require structural changes to support the bigger span.
Choose windows suited to the function of the room, e.g., casements fit kitchens and picture windows fit living areas.
Hardware and materials
Certain window styles, like casement windows, require more complicated hardware and come with higher material costs.
Technicians and equipment
Window styles that are larger tend to require more technicians and equipment to maneuver them into place, meaning labor costs are also higher.
Average costs and best uses for different window types
Use the table below for an overview of typical cost ranges and ideal uses for each window type, keeping in mind that actual prices can vary based on your specific project.
| Window type | Average cost range | Best for |
|---|---|---|
| Awning | $400 to $900 | Basement windows |
| Bay | $1,500 to $7,000 | Living rooms and dining rooms |
| Bow | $1,500 to $7,000 | Living rooms and dining rooms |
| Casement | $450 to $1,000 | Airflow, plus functionality on bay windows |
| Double-hung | $400 to $900 | Standard functionality |
| Egress | $2,500 to $5,000 | Basement windows where escape may be necessary |
| Hopper | $250 to $600 | Basement windows |
| Picture | $250 to $800 | Maximum natural light |
| Single-hung | $300 to $700 | Affordability |
| Skylights | $900 to $2,300+ ($3,000 to $8,000 for new installation) | Natural light, especially in areas with minimal rainfall |
| Sliding | $400 to $800 | Windows that are wider than they are tall |
| Transom | $200 to $600 | Above doors and other windows |
Note: All pricing comes from our experts, who have hands-on experience with window installation and replacement projects, as well as pricing.
Window installation cost for whole house
The average home has 10 to 12 windows, according to Alford, and replacement costs can total between $10,000 and $12,000 for all of them.
Discounts vary based on the installer and sometimes the season, but in most cases, you’ll save money on both materials and labor when you install multiple windows simultaneously rather than one at a time or in phases.
“The more windows you buy, the higher the discount we would provide, due to our ability to pass the pricing discounts from the manufacturer to the customer,” said Alford.
There are a few factors that can influence the total cost of your window replacement project if you’re planning on replacing everything in your home at once, including:
- The number of windows: A new construction home that needs its first set of windows will come with a lower per-window cost than a one-off window installation in an existing home. Speak with your general contractor to see if they can offer a lower per-window cost since they’re already on-site.
- The location of the windows: While you’ll usually see per-window discounts as the number of windows you need increases, installation location still matters. Installing 20 windows in a 2,000-square-foot ranch-style home with a single floor is almost always going to cost less than installing windows in a two-story home with the same number of windows.
- The type and size of the windows you need: You’ll get a discount per window when you agree to install all of your windows at once. But even after that’s applied, you’ll be paying more for larger windows and more complex window types, like bay windows.
- Labor challenges: Most window professionals offer discounts for multiple window installations because you’ll pay once for delivery and trip fees rather than for each window. And you may get bulk pricing on the windows themselves.
However, labor costs may still increase if your installation team needs to use safety equipment or lifts to access specific sites.
Average installation cost by number of windows
Use the table below to estimate your total cost based on the number of windows in your home.
| Number of windows | Average total cost |
|---|---|
| 5 to 7 | $2,850 to $13,300 |
| 8 to 10 | $4,560 to $19,000 |
| 12 to 15 | $6,840 to $28,500 |
| 15 to 25 | $8,550 to $47,500 |
FAQ
How much should labor cost to install a window?
On average, the labor cost to install a window ranges from $360 to $1,200. Labor fees can climb higher for oversized windows, like bay windows or large picture windows that require multiple technicians to maneuver them into place. They can also climb higher for windows on the second story. You could see discounts on labor if you install multiple windows at once.
How much do new windows cost for a 2,000 sq ft house?
The average cost to install new windows on a 2,000-square-foot house is between $10,000 and $12,000. Still, the total can fall much lower or climb significantly higher, depending on a few factors: the number of windows you have, the size and location of each window and the frame and glass materials you want for each.
Your total can also depend on the discount your installer offers per window, which typically increases with the total number of windows you’re installing.
How much does it cost to replace 10 windows?
The average cost to replace 10 windows ranges from $4,560 to $19,000, but the final price can vary based on many factors. Window size, window type, frame material, glass type and location in your home can all affect your pricing. Labor costs per window can also vary widely, as some companies offer discounts per window when you install multiple units, while others don’t.
Are window installation costs tax-deductible?
Window installation costs usually aren’t tax-deductible, but you might be able to take a partial deduction if you replace a window in a home office.
Keep receipts for your window installation and speak with a tax professional to see if you can deduct expenses. You can also check the Database of State Incentives for Renewables and Efficiency (DSIRE) to see if you qualify for tax credits or rebates.
Bottom line
The cost of window installation typically ranges from a few thousand dollars for a small project to nearly $50,000 for larger homes with premium materials. Factors such as window style, materials, labor rates and home size all play a role in the final price. For the most accurate estimate, consider getting multiple quotes from local window professionals based on your specific needs.
Article sources
ConsumerAffairs writers primarily rely on government data, industry experts and original research from other reputable publications to inform their work. Specific sources for this article include:
- Federal Reserve Bank of St. Louis, "Housing Inventory: Median Home Size in Square Feet in the United States." Accessed July 10, 2026.
- North Carolina Clean Energy Technology Center, "DSIRE." Accessed July 10, 2026.
- United States Environmental Protection Agency, "What makes it ENERGY STAR?" Accessed July 10, 2026.
- U.S. Department of Energy, "Guide to Energy-Efficient Windows." Accessed July 10, 2026.
